PDCAAS score chart: protein quality of common foods
A PDCAAS number is easy to copy into a spreadsheet and easy to misunderstand. It does not mean that a percentage of protein disappears during digestion, and a score of 1.00 does not distinguish every high-quality protein. The useful question is what the score represents for a specific ingredient, recipe, or finished product. Use the chart below as a screening reference, then calculate the product-specific score when a formulation or label claim depends on it.
PDCAAS score chart for common foods and protein ingredients
The table combines representative values from peer-reviewed summary tables for isolated proteins and whole foods, including the Food-First protein-quality table, a protein-quality review table, and the Nutrition Reviews comparison table. Values are rounded ranges, not specifications. A range can reflect a whole food versus an isolate, a raw versus cooked sample, a different amino acid reference pattern, or a different digestibility assay.
| Protein source (form used in studies) | Representative PDCAAS | How to read the row |
|---|---|---|
| Whey protein isolate | 0.99–1.00 | Usually reaches the reporting ceiling; the exact product and method still matter. |
| Casein or milk protein | 1.00 | Published uncapped values can exceed 1.00, then are capped in conventional PDCAAS reporting. |
| Egg | 1.00 | Boiled whole egg is reported at 1.00 when capped. |
| Beef or chicken | 1.00 | Published animal-protein values are often capped; the exact result still depends on the sample and method. |
| Soy protein isolate | 0.93–1.00 | Processing and the soy ingredient specification can move the score close to, or at, the ceiling. |
| Pea protein concentrate | 0.75–0.89 | Concentrate values are higher than many cooked whole-pea values. |
| Quinoa | 0.79 | A whole-food value reported in a comparative protein-quality table. |
| Chickpeas | 0.52–0.84 | Values vary widely with the sample and reference pattern. |
| Peas (cooked or whole) | 0.58–0.79 | Cooking and the tested cultivar affect digestibility and amino acid availability. |
| Kidney beans | 0.55–0.65 | Published cooked-bean values cluster in this range. |
| Lentils | 0.51–0.63 | Green, red, and other lentils do not have one universal score. |
| Oat protein or cooked oats | 0.57–0.69 | Protein concentrates and cooked rolled oats are different test materials. |
| Rice protein concentrate or cooked rice | 0.42–0.62 | The concentrate and the cooked grain represent different matrices. |
| Wheat | 0.45–0.50 | Lysine is commonly the first limiting amino acid in cereal proteins. |
| Barley or rye | 0.59 | Grain variety, processing, and the scoring pattern change the result. |
| Roasted peanuts | 0.50–0.52 | The score describes the peanut protein, not the grams of protein in a serving. |
| Sorghum | 0.29 | A lower score reflects a limiting amino acid and lower digestibility in the tested material. |
| Corn-based breakfast cereal | 0.08 | Processing and the cereal matrix can produce a much lower value than an isolated corn ingredient. |
| Hydrolyzed collagen | 0.00 | Collagen contains no tryptophan, so it cannot meet the reference pattern on its own. |
A score of 1.00 is the top of the conventional PDCAAS scale. It means the protein meets or exceeds the selected reference pattern after the digestibility correction and the reporting cap. It does not mean that 100% of the protein is absorbed, and it does not prove that two products with a 1.00 score are nutritionally identical.
These bands are a reading aid, not official quality classes:
- 1.00: Meets or exceeds the reference after capping. The cap hides differences among high-quality proteins.
- 0.75 to 0.99: Generally close to the reference, with one limiting amino acid or lower digestibility reducing the result.
- 0.50 to 0.74: Moderate single-source quality. A complementary protein can improve the amino acid balance of a blend.
- Below 0.50: Lower quality as a standalone source under that test method. The score does not make the food useless or describe the quality of the whole diet.
What PDCAAS measures
PDCAAS stands for protein digestibility-corrected amino acid score. It combines two questions:
- Does the protein provide enough of each indispensable amino acid relative to a reference pattern?
- How much of the protein is digested in the test method?
The calculation starts with an amino acid score for each indispensable amino acid. The lowest ratio is the limiting amino acid score:
Amino acid score =
mg of the limiting indispensable amino acid per g of test protein
÷ mg of that amino acid per g of reference protein
The conventional calculation then applies true protein digestibility:
Raw PDCAAS = lowest amino acid score × true fecal protein digestibility
Reported PDCAAS = raw PDCAAS, capped at 1.00
For example, a protein with a limiting amino acid ratio of 0.80 and true digestibility of 0.90 has a raw PDCAAS of 0.72. That 0.72 is a relative protein-quality score. It is not a claim that 72% of the grams on the label will be absorbed.
A protein can have high digestibility and still score lower when one indispensable amino acid is scarce. Cereal proteins are often limited by lysine. Legume and pulse proteins can be limited by sulfur amino acids, such as methionine and cysteine. Collagen illustrates the other extreme: its lack of tryptophan gives it a score of zero as a standalone protein.
Why the same food can have different PDCAAS values
A chart is a useful starting point, yet a food name alone does not define a score. The following variables can change the result.
Ingredient form and processing
An isolate, a concentrate, a flour, and a cooked whole food have different amino acid concentrations and digestibility. Removing fiber and other non-protein components can change the result. Heat can reduce some antinutritional factors and improve digestibility, while severe processing can damage amino acids such as lysine. The cooked grain in a recipe therefore cannot be assigned the score of a purified rice protein concentrate.
Reference scoring pattern
The amino acid pattern is a comparison standard, not a property of the food. Older PDCAAS work commonly used the 1985 FAO/WHO/UNU preschool-child pattern for most age groups. Later work uses age-specific patterns for some applications. A change in the reference pattern can change which amino acid is limiting and shift the score.
Digestibility method and test model
PDCAAS traditionally uses true fecal protein digestibility. Published datasets include results measured in humans, growing pigs, or rats, and those models do not produce identical values. The source tables identify the test model for their rows, which is why values should be treated as representative rather than universal.
Truncation at 1.00
Many dairy, egg, and meat proteins have an uncapped value above 1.00. Conventional PDCAAS reporting compresses those values to 1.00, so the chart cannot show the difference between a raw score of 1.05 and 1.20. The truncation also means a high-quality protein's extra amino acids are not credited when it complements a protein that is low in a different amino acid. The FAO protein-quality report discusses this limitation and the reasons a newer method was proposed.
How to calculate PDCAAS for a blend or finished product
Do not average the PDCAAS values of the ingredients. A blend's score depends on the amino acids contributed by each ingredient and the proportion of total protein each ingredient supplies. A practical calculation follows this sequence:
- List each protein source and its protein mass. Use grams of protein from each ingredient, rather than grams of flour, syrup, or finished mix.
- Obtain amino acid composition for each source. The values should be on the same protein basis and use the amino acids required by the applicable reference pattern.
- Weight each amino acid by the protein contributed. Add the lysine, sulfur amino acids, threonine, tryptophan, and other required amino acids from all sources.
- Divide each total by total protein. This gives the blend's amino acid content per gram of protein.
- Compare each amino acid with the reference pattern. The lowest ratio is the blend's limiting amino acid score.
- Apply the blend's true protein digestibility. Use a weighted digestibility calculation when the component data are established, or use the result from a finished-product assay.
- Apply the reporting rule. Conventional PDCAAS is reported no higher than 1.00. Record whether the method caps the amino acid ratio before multiplication or caps the final value, since technical guidance has used both approaches over time.
Health Canada's PDCAAS methodology includes a worked wheat, chickpea, and milk-powder mixture. The example calculates a limiting lysine ratio of 0.87, a weighted digestibility of 0.85, and a final PDCAAS of 0.74. That result comes from the composition and proportions of the mixture, not from averaging the three ingredient scores.
For U.S. Nutrition Facts labeling, the protein line continues to show the actual grams per serving. Under 21 CFR 101.9(c)(7), the corrected protein amount for foods represented for adults and children age 1 or older is the actual grams per serving multiplied by the PDCAAS, capped at 1.00. Foods represented specifically for infants through 12 months use a relative protein quality value instead: the food's Protein Efficiency Ratio (PER) divided by casein's PER, also capped at 1.00.
When a corrected protein declaration is required, the corrected amount is used to calculate protein's percent Daily Value. The actual grams remain in the Nutrition Facts line, and the percentage appears adjacent under the “Percent Daily Value” column. A protein claim requires this percent-DV statement; so does a food represented specifically for infants through 12 months or children 1 through 3 years of age. For infant-specific foods with a relative protein quality value below 40 percent of the casein PER reference, the protein %RDI is not declared and the label carries an adjacent “not a significant source of protein” statement. For an adult food with 20 g of actual protein and a PDCAAS of 0.75, the corrected amount for the calculation is 15 g; against the adult 50 g Daily Reference Value, that yields a 30 percent Daily Value declaration when required. A generic chart cannot replace the product-specific calculation.
PDCAAS versus DIAAS
The FAO's 2013 consultation recommended DIAAS, or digestible indispensable amino acid score, as a replacement for PDCAAS in protein-quality assessment. The methods answer similar questions, but they handle digestibility differently:
| Feature | PDCAAS | DIAAS |
|---|---|---|
| Digestibility correction | One true fecal protein-digestibility value | True ileal digestibility for each indispensable amino acid |
| Score ceiling | Conventionally capped at 1.00 | Not capped, so values can exceed 1.00 |
| What the score can show | The lowest amino acid ratio after one digestibility correction | The lowest digestible amino acid ratio, with amino acids treated individually |
| Common use | Established food-label and legacy datasets | Current research and newer protein-quality comparisons |
DIAAS can distinguish proteins that all appear as 1.00 under PDCAAS. Published comparative tables report values such as 1.09 for whey isolate, 1.20 for milk protein concentrate, and 1.09 for casein, while their conventional PDCAAS values are capped at or near 1.00. DIAAS still requires a defined sample, reference pattern, and digestibility dataset, so it is not a universal replacement for product-specific analysis.
For U.S. labeling, PDCAAS is the method specified for foods represented for adults and children age 1 or older. Foods represented specifically for infants through 12 months use the relative protein quality value calculated as the food's PER divided by casein's PER. Use the method required for the product's intended age group and claim rather than substituting DIAAS where the regulation calls for PDCAAS.
What the chart can and cannot tell a product team
Use it for formulation screening. A cereal and pulse can complement each other when one supplies the amino acid that limits the other. The chart can identify candidates for a blend, then the weighted calculation determines whether the proportions work.
Use it to ask better supplier questions. Request the ingredient form, amino acid profile, digestibility basis, reference pattern, test model, and method version. A supplier's score without those details is difficult to compare with a published value.
Do not treat it as a finished-product claim. The score of an isolated soy ingredient does not automatically become the score of a bar containing soy, oats, collagen, sweeteners, and fats. Processing, protein contribution, and the final matrix all matter.
Keep protein quality separate from other quality decisions. PDCAAS does not measure contaminants, allergens, label accuracy, shelf life, taste, sustainability, or the adequacy of a person's overall diet. Those questions need their own data and specifications.
FAQ
Is a PDCAAS of 1.00 the same as 100% absorption?
No. PDCAAS is a relative quality score based on the limiting indispensable amino acid and a digestibility correction. A value of 1.00 is the reporting ceiling, and it does not state how many grams of protein are absorbed from a serving.
Why does soy protein show different scores in different charts?
Soy scores can differ because a chart may describe flour, concentrate, isolate, or a finished food. Cultivar, processing, reference pattern, test model, digestibility method, and truncation also change the reported value. Use the score tied to the exact ingredient and method in your product file.
Can I use a generic PDCAAS chart for a protein claim?
Use a generic chart for early formulation work. U.S. label claims require product-specific data. Under 21 CFR 101.9(c)(7), foods represented for adults and children age 1 or older use PDCAAS; foods specifically for infants through 12 months use a relative protein quality value calculated as the food's PER divided by casein's PER. In qualifying cases, the corrected amount is used to calculate the percent Daily Value declaration, while the actual protein grams remain on the label.
Does mixing rice and beans guarantee a PDCAAS of 1.00?
No. The combination can improve the amino acid balance, but the result depends on the protein proportions, processing, digestibility, and reference pattern. Calculate the blend from the amino acids contributed by each source.
Is DIAAS always the right number to use instead?
DIAAS is the newer method recommended by FAO for protein-quality assessment and can provide more detail for research comparisons. A regulatory program may still require PDCAAS, so the correct metric depends on the purpose and jurisdiction.
Build an auditable protein-quality workflow with Light Labs
Protein-quality work sits alongside nutrition, contaminant, and compliance data. We combine our ISO 17025-accredited lab with our testing platform to keep orders, results, COAs, and product records together. Our compliance tools help teams connect test results to product limits and reporting workflows, and our testing menu helps teams plan the broader ingredient and finished-product work around a protein specification. Talk with our team through get a demo when you need to map analytical inputs and keep the supporting records attached to the right SKU and lot.
Final takeaway
A PDCAAS score chart is a screening tool, not a product specification. The score combines the first limiting amino acid with true fecal protein digestibility, then conventional reporting caps it at 1.00. Ranges are expected because ingredient form, processing, reference pattern, and test method change the result. Use product-specific data for blends and labels, and use DIAAS when a comparison calls for individual ileal amino acid digestibility.
Sources6 sources
- Dietary protein quality evaluation in human nutrition - Food and Agriculture Organization of the United Nations
- Determination of the protein rating using PDCAAS - Health Canada
- 21 CFR 101.9: Nutrition labeling of food - Electronic Code of Federal Regulations
- Food-first approach to enhance the regulation of post-exercise skeletal muscle protein synthesis and remodeling - Sports Medicine
- Current concepts and unresolved questions in dietary protein requirements and supplements in adults - Frontiers in Nutrition
- PDCAAS and DIAAS of various protein sources - Nutrition Reviews, Oxford Academic
Whether you’re a brand or a co-manufacturer, Light Labs helps you move faster, stay compliant, and eliminate testing bottlenecks — all from a modern, shared platform.